[Elecraft] K3 Uh-oh... won't turn off

[Nr4c]

Read your last paragraph and double check your work. 

Sent from my iPhone
...nr4c. bill


> On Oct 28, 2017, at 3:55 AM, Drew AF2Z <pubx1 at af2z.net> wrote:
> 
> My K3 turns on whenever power is connected, without pushing the power button. When I push the power button to shut down the display clears but remains lit-- just a blank amber display. Can only turn on again by recycling the power supply; the K3 Power button has no effect. Otherwise the rig seems to operate normally.
> 
> I reloaded the firmware and config settings but that didn't help.
> 
> This occurred  after I replaced the FP plugs with the gold plated ones. I replaced the PA plugs about a week ago. All plugs are mated/seated correctly; good solder job.
> 
> Any ideas?
> 
> 73,
> Drew
> AF2Z
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com