[Elecraft] KXPA100 not transmitting

[SAMUEL L ROWE]

Thanks Don

I knew it had to be something simple that I missed.

73

Sam KG9NG


________________________________
From: Don Wilhelm <donwilh at embarqmail.com>
Sent: Thursday, October 26, 2017 5:45 PM
To: SAMUEL L ROWE; Elecraft at mailman.qth.net
Subject: Re: [Elecraft] KXPA100 not transmitting

Sam,

That is normal operation while the KXAT100 is tuning.  See the KXPA100
manual page 25 "ATU Tuning".

The power is limited to 25 watts while the ATU is tuning and the 25/SWR
LED under POWER OUT blinks.

Note that ATU is different than TUNE - see page 19 in the KX2 manual.

73,
Don W3FPR

On 10/26/2017 5:45 PM, SAMUEL L ROWE wrote:
> Is anyone running a Elecraft KXPA100 amp with KXAT100 with a KX2 or KX3 that could help me with a little troubleshooting?
>
> The power amp light blinks slowly (not on steady) and while turner tunes, the amp will not go to transmit but shows 25 W output.  I am using the KX2-controled connection.
>