[Elecraft] KXPA100 not transmitting

[dick at elecraft.com]

The KXPA100 blinks a LED while ATU TUNE is in progress.  The ATU TUNE needs
steady carrier from your KX2.  ATU TUNE is done with exciter power, and when
it's complete, the amp can be switched in.

73 de Dick, K6KR

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of SAMUEL L ROWE
Sent: Thursday, October 26, 2017 14:46
To: Elecraft at mailman.qth.net
Subject: [Elecraft] KXPA100 not transmitting

Is anyone running a Elecraft KXPA100 amp with KXAT100 with a KX2 or KX3 that
could help me with a little troubleshooting?

The power amp light blinks slowly (not on steady) and while turner tunes,
the amp will not go to transmit but shows 25 W output.  I am using the
KX2-controled connection.

My KX2 S# 01749 was new from Elecraft; the KXPA100 S# 1532 was acquired
gently? used.

73

Sam, KG9NG

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com