[Elecraft] "See" CW WPM on P3/SVGA?

[Cady, Fred]

Hi Bret,

You can turn on CW decoding in the K3S and see the decoded CW and the CW speed in the VFO B display area.


Hold TEXT DEC and tune VFO B to WPM CHK.  You can also choose TX ONLY to check your sending, CW 5-40 and CW 30-90.

Tune VFO A to adjust the decoding threshold.  thr AUTO is a good place to start.


CW decoding works best when you are tuned to the zero beat frequency.

Turn CWT on by tapping  CWT and then tap SPOT to automatically slide you in on the correct freqquency.


Now turn the big knob to a CW signal you see on the P3.


Cheers,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>.


________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of MaverickNH <cbjesseeNH at comcast.net>
Sent: Sunday, October 22, 2017 4:24 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] "See" CW WPM on P3/SVGA?

I wondering if there's a way to configure my K3S/P3/SVGA to "see" WPM in CW?
I'm a beginner and would like to find those slow QSOs at ~20wpm. CWOPS has a
Tue/Fri/Sun 7.035-7.045 6-8pm local suggestion for CWA students/graduates,
but it's hard to find...

Some combination of K3S and P3 settings, or just wheel the Big Knob around?

Bret/N4SRN



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu