[Elecraft] setting up digital on k3

[Josh]

Data A is absolutely the correct mode for JT65 & 8. You don't want any comp or TX EQ you have with sideband. 

73,
Josh W6XU

Sent from my mobile device

> On Oct 20, 2017, at 10:10 AM, Robert . <woodr90 at gmail.com> wrote:
> 
> For ft8 jt65
> Mode must be USB
> 
> Data modes on k3 are setup for rtty
> Best I recall
> 
> 73 Robert W5AJ
> 
> On Oct 20, 2017 09:39, "haircutter at verizon.net" <haircutter at verizon.net>
> wrote:
> 
>> Hello Group,
>> Must be getting old. I am trying to get my k3 to transmit digital, but not
>> having any luck.
>> I am using wsjt-x. Receives great, but cant get my k3 to transmit. have the
>> k3 set to data-a and the vox is on. Mic gain doesn't do anything. Am I
>> missing a setting somewhere.
>> Help would be appreciated.
>> 
>> Don...w2xb
>> 
>> 
>> 
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to woodr90 at gmail.com
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to josh at voodoolab.com