[Elecraft] Recent Thread on Powering Down K3

[Fred Jensen]

That is what the RRC-1258 at the K3 does.  When it's all set up, turning 
on the K3/0 [or
K3 or K3s] will turn on the remote radio.  When the K3/0 is turned off, 
the remote K3 shuts down completely.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 10/14/2017 5:54 AM, Don Wilhelm wrote:
> Dick,
>
> The K3 (note no hyphen in Elecraft model designations) can be powered 
> off via the PS0 command.
> To power it on, Pin 8 of the ACC connector can be pulled to ground.
>
> 73,
> Don W3FPR