[Elecraft] Occasional K3 error messages on startup

[Don Wilhelm]

Dave,

The place to start is putting the gold pins in your K3.
If that does not help, then contact support.

73,
Don W3FPR

On 10/12/2017 7:56 PM, Dave Hachadorian wrote:
> For the past month or so, when I turn on one of my K3’s, I sometimes get an ERR BP1 message.  If I then press DISP, I get a series of different error messages, and then finally the VFO B frequency is displayed, and the rig seems to work normally.  The sequence of ERR messages is