[Elecraft] Data mode shows 600hz BW on P3

[Don Wilhelm]

Jim,

Why use XFIL at all?  The filter selection will follow the DSP filter 
bandwidth, switching in your filters as needed for the bandwidth 
selected by the DSP Width filter.

I never have found a use for the XFIL button on my K3, I do it all with 
the width control.

73,
Don W3FPR

On 10/6/2017 9:10 PM, Jim Shepherd wrote:
> Thanks for the help--Bandwidth was showing full on the screen on the K3s,
> but when I hit the XFIL a couple of times it cleared up even though I did
> not change any filters.  It stayed ok for a couple of hours of making
> contacts, so I hope it is cured... 73  Jim W6US
>