[Elecraft] Data mode shows 600hz BW on P3

[Don Wilhelm]

Jim,

Yes, the filter width in DATA A mode defaults to a narrow bandwidth - 
even though you have the 2.8kHz filter, it still defaults to a narrow 
bandwidth like 400 or 600 Hz (I can't recall which).
That is an aid to those who choose to use the VFO dial to tune in a 
single data mode station.

SSB mode defaults to the 2.8kHz.

Not to worry, it is easy to change, just grab the WIDTH knob and turn it 
until you see a waterfall width to your liking.

73,
Don W3FPR

On 10/6/2017 6:28 PM, Jim Shepherd wrote:
> When I switch to DATA mode, the receive bandwidth is only about 600 Hz even
> though when I check with Data MD it shows the USB mode. I have the 2.8
> filter selected and it shows on the display and using the K3 Utility
> program.