[Elecraft] KX3 with BL2 Question

[stan levandowski]

Thank you to everyone for the rapid responses.  Now I know my options.  
As a long time feedpoint autocoupler user, this is a new approach for me 
and it's nice to get advice before cutting wire and cable up.
73, Stan WB2LQF


On Wed, Oct 04, 2017 at 09:26 AM, stan levandowski wrote:

> When operating a KX3 with the internal ATU into a window line fed 
> doublet through a BL2 balun, what is the preferred connection method:
>
> 1.  Placing the BL2 right at the KX3 output eliminating any coax.  
> This puts the window line right next to the metal KX3, everything else 
> on the operating desk and the operator.
>
>
> 2.  Placing the BL2 five feet away and higher which puts the window 
> line further away and connecting it to the KX3 through a short coax 
> jumper.
>
>
> 3.  Placing the balun (weathered-proofed) right at the doublet's 
> center and using coax for the whole run to the KX3.
>
>
> Thanks and 73,
> Stan WB2LQF
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to sjl219 at optonline.net
>