[Elecraft] Dual Radios Single Logging

[Ross Primrose]

This doesn't give you real-time logging, but fldigi can export your QSO 
info as an ADIF file which you should be able to import into Logic 9.  
Better than manual ;)

73, Ross N4RP

On 10/4/2017 4:48 AM, G4pelRoss wrote:
> Hello Forum.
> I have two PC's "A" & "B" running on WIN 10.
>
> I now have two Transceivers:
>
> An Icom 7800 connected to PC "A" via a 232 port/USB serial
> converter cable.
> This enables my logging Program Logic 9 installed on PC "A" to read 
> the frequency, mode, etc from the 7800.
> LOgic 9's database is on PC "A".
>
> I have an Elecraft K3s connect to PC "B" via their USB ports, and 
> operate my Data modes (FlDigi)
> Easypal, CW, Olivia, RTTY, ect, using PC "B".
> However I have to*manually*  enter all the QSO's worked on the K3s 
> into LOgic 9 on PC "A".
>
> Retaining the USB link between the K3s and PC(B), I would like to 
> connect a link between
> the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from 
> the K3s QSO's.
>
> I only use one radio at any one time, switching the PTT and antenna 
> connection's manually.
>
> Ross (G4PEL)
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4rp at n4rp.com


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”