[Elecraft] KX3 with BL2 Question

[Don Wilhelm]

Stan,

Either of those options will work - however ---
I would suggest minimizing the coax.  The balun will not transform to a 
50 ohm load, so the coax can run at a high SWR which will give more loss 
than the window line.

Whether that minimum is zero or 5 feet will not make a significant 
difference, so use whatever is convenient for your station.

73,
Don W3FPR

On 10/4/2017 9:26 AM, stan levandowski wrote:
> When operating a KX3 with the internal ATU into a window line fed 
> doublet through a BL2 balun, what is the preferred connection method:
>