[Elecraft] using the KX2 as a remote control head for K3

[Wayne Burdick]

Igor,

The KX2 does not yet have the rig-control feature of the KX3. This would be fairly easy to add. However, it is only a limited parametric controller; see page 28 of the KX3 manual. 

K3-to-K3 remote control mirrors the front panel directly. For that you need a K3, K3S, or K3/0-mini at the control end.

In either case, audio streams and the keyer paddle must be handled separately. 

73,
Wayne
N6KR


> On Nov 29, 2017, at 8:42 PM, Igor Sokolov <ua9cdc at gmail.com> wrote:
> 
> Has this question been answered?
> 
> I did search the reflector but could not find an answer.
> 
> 
> 73, Igor UA9CDC
> 
> 
> 21.07.2017 22:59, Matt NQ6N пишет:
>> I seem to recall this being discussed with the KX3, but I haven't been able
>> to find the relevant discussion.
>> 
>> I'm curious if the KX2 can be used to control the K3 remotely in the same
>> way that a K3 can be used to do so.  Any tips or links to help me figure
>> this out would be much appreciated.
>> 
>> I am using RCForb connected to the K3 in the shack, but also have an RRC
>> remote unit and would consider any other options.
>> 
>> 73,
>> Matt NQ6N
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ua9cdc at gmail.com
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com