[Elecraft] Antenna 2

[Don Wilhelm]

Paul,

There is some stray coupling between ANT1 and ANT2, but no direct path.
The unused antenna is not grounded.  One reason is that it can be used 
to feed the subRX AUX ANT input when using diversity.

73,
Don W3FPR

On 11/28/2017 2:36 AM, Paul Ormandy wrote:
> Hi all,
> 
>      When messing around today with antennas, I had my aerial connected 
> only to
>      Ant 1 and discovered that when selected, Ant 2 was capable of 
> receiving
>      signals with no antenna connected to it, albeit at a much reduced 
> signal. I would have thought the unused
>      port would have been earthed out??