[Elecraft] KX3 clock & battery. (Was KX3 clock will not, set from KX3 utility)

[Dave B]

My thoughts too, re best confirmed (or not) by Elecraft.

I've got the schematics (filed somewhere) I'll take a look later, see if
there is anything "obvious" that might be an issue.

Many thanks & 73.

Dave G0WBX.


On 27/11/17 17:14, rich hurd WC3T wrote:
> According to the KXBC3 manual (last two sentences of Page 2),
>
>  "Only a few microamperes of current are required to keep the clock
> running when the KX3 is off. This is supplied by either the external
> power supply or the internal batteries."
>
> By this I take it that if there is a 13V power supply connected and
> running, that it feeds the clock; and if not, it's fed by the
> batteries.   However, this might be confirmed best by Elecraft.
>
> ---
> 72,
> Rich Hurd / WC3T / DMR: 3142737  
> PA Army MARS, Northampton County RACES, EPA-ARRL Public Information
> Officer for Scouting
> Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33'
> W) Grid: *FN20is*