[Elecraft] KX3 CW Decode question

[tomb18]

HiYes it applies there as well. When you use software that is reading the decoded CW, it is requesting the characters from the radio. Same thing with the p3 and px3. They end up competing with each other. So if you use software to get the CW, turn off the p3 or px3 decoing. 73 Tom 


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: rich hurd WC3T <rich at wc3t.us> Date: 2017-11-26  7:26 PM  (GMT-05:00) To: tomb18 <tomb18 at videotron.ca> Cc: MaverickNH <cbjesseeNH at comcast.net>, elecraft at mailman.qth.net Subject: KX3 CW Decode question 
Hi Tom (or anyone else who knows), 
Does this also hold true for the decode function in the KX3 and the PX3?  Should I not run those simultaneously either?  Or is it only the interaction between the hardware and the utility program?
On Sat, Nov 25, 2017 at 15:17 tomb18 <tomb18 at videotron.ca> wrote:
HiActually what is happening is that both the p3 svga and the utility are attempting to get access to the decoded text at the same time  so when one gets a character, the other misses it.. If you wish to use the utility, just turn off text decoding display on the svga. 73 Tom 





Sent from my Samsung Galaxy smartphone.

-------- Original message --------From: MaverickNH <cbjesseeNH at comcast.net> Date: 2017-11-25  2:31 PM  (GMT-05:00) To: elecraft at mailman.qth.net Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle

I have always had problems using the K3 Utility to change configurations from

another mode to CW, as I could see text decode on the K3S VFO B display area

after a restore to my CW configuration but not on the P3-SVGA external

display without a lot of fiddling. I see now that simply turning the P3

on/off is required after a configuration restore to get that text decode to

display.



I would make a note of that but would just forget where I put it. Now, it's

right here for me to find!



Bret/N4SRN







--

Sent from: http://elecraft.365791.n2.nabble.com/

______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to tomb18 at videotron.ca

______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to rich at wc3t.us-- 
---72,Rich Hurd / WC3T / DMR: 3142737  PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for ScoutingLatitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid: FN20is