[Elecraft] . New KPA1500 feature

[William Stacy]

Wow! Now I am even more excited than I was before.

VY 73,
Bill, N5TU

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10


Message: 16
Date: Wed, 22 Nov 2017 15:27:44 -0800
From: Wayne Burdick <n6kr at elecraft.com>
To: Elecraft Reflector <elecraft at mailman.qth.net>
Cc: elecraft_k3 at yahoogroups.com
Subject: [Elecraft] New KPA1500 feature: ATU TUNE integration with K3
        and K3S transceivers
Message-ID: <FE505797-85F7-403A-901C-AF76A39E53E2 at elecraft.com>
Content-Type: text/plain; charset=utf-8

If your KPA1500 is connected to a K3/K3S via the ACC cable, you?ll be able to tune the amplifier?s internal ATU without touching any controls on the transceiver.

For a manual tune, all that?s required is to tap the ATU TUNE switch on the amplifier. (Originally, three switch presses were required, because of the need to start and stop TUNE at the transceiver. This will now be handled automatically.)

For SWR-based re-tunes, the amplifier can now complete the ATU tuning cycle quickly even in SSB mode, with no operator intervention required.

Wayne




------------------------------

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=02%7C01%7Cwstacy%40outlook.com%7C6f9dce908497497b27fd08d532013f34%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636469903308991908&sdata=0dSh140%2FZG8EREqlvmTwWAQanVZbXUb%2Flk77yZeVWd0%3D&reserved=0
You must be a subscriber to post.
Elecraft web page: https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.elecraft.com&data=02%7C01%7Cwstacy%40outlook.com%7C6f9dce908497497b27fd08d532013f34%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636469903308991908&sdata=3bVZwxateO7cZRTO4T2PDZJKW4Cwn7WsEl45kjnU9JU%3D&reserved=0

End of Elecraft Digest, Vol 163, Issue 27
*****************************************