[Elecraft] K3 speaker with Remoterig

[Rick Tavan]

You can switch an external speaker (or two) between the radio and the RRC.
You might need a little amplification, depending on the efficiency of the
chosen speaker(s). Powered computer speakers should do nicely.

/Rick N6XI


Rick Tavan
Truckee, CA

On Mon, Nov 20, 2017 at 12:31 PM, Fred Jensen <k6dgw at foothill.net> wrote:

> Jorge,
>
> You said "K3".  RemoteRig with a K3 is a bit different than with a K3s or
> K3/0.  With the K3, the receive audio is on the SP jack on the RRC 1258.
> It never gets into the control K3 radio.
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 11/20/2017 10:47 AM, Jorge Diez - CX6VM wrote:
>
>> Hello
>>
>> I use K3 speaker, I programmed RIT button to switch SPKR+PH to YES and NO
>>
>> Now I connected Remoterig, and on control radio, I am not able to listen
>> to
>> K3 speaker
>>
>> How can I do to listen to K3 speaker, so, to hear K3 speaker when  SPKR+PH
>> = YES ?
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rtavan at gmail.com
>