[Elecraft] [KX2] Cannot turn off switch cw tones

[Don Wilhelm]

Stephen,

I do not see anything definitive saying how to turn it off, but on the 
assumption that it might be a toggle, hold down APF, Rate, and A/B while 
powering on again.  If it turns off, that is good, but if it is still 
present, you will have to wait until Wayne can tell us how to turn it 
off (hopefully it is not EEINIT).

73,
Don W3FPR

On 11/20/2017 2:42 PM, Stephen Prior wrote:
> I was playing with the new features in 2.81 and enabled the tones by
> holding down APF (plus Rate and A/B) at start-up.  All works great, the
> double tap on PTT gives the freq. etc.  However, having established that it
> works, I'm now stuck in the mode.  I can go into Setup and turn SW tones to
> off but when I turn the KX2 off and then on again, the SW tones is now set
> back to 20!
> 
> I have read everything I can find, but I cannot see how to get out of this
> so that I have no tones of any description.
> 
> Any advice gratefully received!
> 
> Thanks and 73, Stephen G4SJP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>