[Elecraft] [K3S] wsprlite-flexi patched into the K3S

[Don Wilhelm]

Dave,

There is no input to the transmit amplification process in the K3S - you 
would have to do a significant modification to accomplish that.

I am not certain why you think the signal filtering would be an 
advantage.  The filtering in the K3/K3S is mostly in the receive path 
(except for the TX EQ).  The device you mention is transmit only, and 
you view the results of your transmitted signal on the internet.

OTOH, if you are refering to the K3S Low Pass Filters (the bare 
wspr-lite has no low pass filters and they must be added externally), 
then again, there is no externally accessible path to run wspr-lite 
through those K3S filters without significant modification.

73,
Don W3FPR

On 11/20/2017 8:49 AM, David Windisch wrote:
> Hi, all concerned:
> Could this wsprlite-flexi device described here:
> https://www.sotabeams.co.uk/wsprlite-flexi
> be patched into the K3S to take advantage of its signal filtering and
> (ahem!) amplification capabilities?