[Elecraft] [K2] On initial Power-up, '"INFO 201" Remains

[Michael Eberle]

Looks like the EEPROM may not be initializing.  Double check U7 and make 
sure you don't have any bad/missing solder joints and make sure it is 
oriented the right direction.
I don't remember if it is in a socket or not, but if so, make sure all 
the pins went into the socket.  Basic stuff but the kind of mistake I 
would be likely to make.

73,
Mike, KI0HA

On 11/15/2017 19:55, Dan, K7DJK via Elecraft wrote:
> Need some help here.
>
> Been working on my K2 S/N 7770 and got to the point where power is first applied.
>
> Upon pressing the Power button, got the INFO 201 message, but it just remained on the display.  It never went away and I never saw the ‘7100.00c’.
>
> Turned power off and then cycled it back on.  Now, the display is simply blank.  Nothing.
>
> I reset the K2 (pressing 4-5-6 then powering up), and the INFO 201 came up again with the same symptoms.
>
> Would appreciate any thoughts on what might be happening.
>
> 73,
> Dan, K7DJK
>
>