[Elecraft] sharing K3 RS232 to CAT and Remoterig

[Jorge Diez - CX6VM]

Hi John

thanks for the information

N6TV Y box will work for ACC port, but I need something equal for RS232 port

I use a Y cable to ACC to drive bandecoder and amplifier and works fine

thanks,
Jorge

2017-11-14 20:34 GMT-03:00 <john at kk9a.com>:

> I use a Top Ten Band decoder to control a SixPak. This is connected to the
> RS-232 jack. I often have other devices(such as a MicroHAM DigiKeyer2) also
> connected to this jack using a N6TV Y-box. For two devices you can use an
> inexpensive Y adaptor instead. I have no experience with a remoterig box.
>
> John KK9A
>
>
> Jorge Diez - CX6VM cx6vm.jorge at gmail.com
> Hello
>
> At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable
> connected to K3´s RS232
>
> So when I change bands in the radio, antenna is selected automatically
> through CAT cable and band decoder (Bandmaster III)
>
> Today I connected remoterig box, so needed to remove CAT cable to connect
> remoterig.
>
> So now I lost the feature to change antennas automatically when I change
> bands on the K3
>
> How can I do to share RS232 to have CAT and remoterig at the same time?
>
> thanks,
> Jorge
> CX6VM/CW5W
>
>


-- 
73,
Jorge
CX6VM/CW5W