[Elecraft] WSJT-X K3/K3s hanging as Tx

[Gordon LaPoint]

To add to my previous post-

I have the problem, home made interface for serial port ptt. This 
problem is NOT a MicroHam problem, or Elecraft problem.
I have had the problem on my IC-7000 and ANAN-10E (which I no longer use 
split on, not needed there)  I have not seen the problem when NOT using 
split.
The problem *IS NOT* rf in the shack, it happens even with 1 watt out, 
and nothing else happens even when the KPA-500 is on at full power, any 
mode!
Please - this *IS NOT* a ptt contention problem or rf in the shack problem.
Gordon  - N1MGO

On 11/13/2017 07:08 PM, Don Wilhelm wrote:
> Bert and all,
>
> Use software PTT in the applications while W4TV figures out what is 
> going on with the MicorHam  gear.
> Are all those having a similar problem using MicroHam something? or 
> does it occur with other interfaces.
>
> 73,
> Don W3FPR
>
> On 11/13/2017 7:00 PM, Bert Garcia N8NN wrote:
>> The CAT and PTT are on different COM ports, per the installation 
>> instructions for the microKEYER II when using WSTJ-X.  And it's not a 
>> stray RF problem as I have all the equipment bonded together, ferrite 
>> cores on the audio and control lines, a line isolator in the feedline 
>> where it enters the house, and line isolators between the rig and amp 
>> and between the amp and antenna tuner.  The lockup happens when 
>> running only 30 watts with FT8.  It never happens when running a KW 
>> on many other modes.  I run RTTY, PSK and other digital modes with no 
>> problems.
>>
>> Thus, I suspect the issue is associated with the WSRJ-X software as 
>> the same issue occurs with various transceivers in multiple locations.
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gordon.lapoint at gmail.com


-- 
Gordon - N1MGO