[Elecraft] WSJT-X K3/K3s hanging as Tx

[Don Wilhelm]

Bert and all,

Use software PTT in the applications while W4TV figures out what is 
going on with the MicorHam  gear.
Are all those having a similar problem using MicroHam something? or does 
it occur with other interfaces.

73,
Don W3FPR

On 11/13/2017 7:00 PM, Bert Garcia N8NN wrote:
> The CAT and PTT are on different COM ports, per the installation instructions for the microKEYER II when using WSTJ-X.  And it's not a stray RF problem as I have all the equipment bonded together, ferrite cores on the audio and control lines, a line isolator in the feedline where it enters the house, and line isolators between the rig and amp and between the amp and antenna tuner.  The lockup happens when running only 30 watts with FT8.  It never happens when running a KW on many other modes.  I run RTTY, PSK and other digital modes with no problems.
>
> Thus, I suspect the issue is associated with the WSRJ-X software as the same issue occurs with various transceivers in multiple locations.
>
>