[Elecraft] WSJT-X K3/K3s hanging as Tx

[Jim Brown]

On 11/13/2017 11:12 AM, Gary Smith wrote:
> For those using WSJT-X, sometimes I find
> the K3s is locked as transmit but there is
> no RF being sent and no Rx from the K3.

I've been using WSJT-X since it was first introduced several years ago, 
and I've never had this problem. I've always used VOX to put the rig in 
TX mode, as I do with SSB and all digital modes. I've often run with a 
power amp that uses a vacuum relay for T/R switching, and there's 
sufficient delay within the K3 and K3s for the amp's T/R relay to switch.

73, Jim K9YC