[Elecraft] Software suggestions for KX3

[tomb18]

HiI don't think I ever got an email from you. However, in almost all cases, of double images, it is traceable to an issue with the cable or a 2.5 mm to 3.5 mm adapter. Use an ohm meter and then follow the connection, making sure it is providing the stereo signal from the kx3 to your sound card. The adapters are prone to bad connections as are 2.5mm Jack's it seems. If it is stereo then follow the guide in the win4k3 manual to ensure that you selected 192khz, 24 bit 2 channel in the recording options for your sound device. It all comes down to this only. 73 Tom  va2fsq.com 

Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: ohturoey <ohturoey at hotmail.com> Date: 2017-11-09  2:04 PM  (GMT-05:00) To: elecraft at mailman.qth.net Subject: Re: [Elecraft] Software suggestions for KX3 
Dear Sir
I have the same setup as you with the KX3 win4k3 and the steinberg UR22mkII
I have tried for a long time to get the UR22 to work with my panadapter in
win4k3 but with no success
I get a double image, left and right of centerline is the same, have tried
to adjust but I cant seem to figure it out, if you can explain your cabling
setup between UR22mkII and KX3 and your panadapter settings for tuning the
bands it would be greatly appreciated 
please don't be shy to explain it as you would do to a child, this unit has
added a few grey hairs to where its already to many
picture does also help

Best regards
Ove
VA7OHT/VE0OHT



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca