[Elecraft] Minicircuits splitter for diversity?

[Michael Walker]

Yep, 1000ft of RG11 direct burial for $100 on Amazon.  Good enough for HF
on any day.

Mike va3mw


On Mon, Nov 6, 2017 at 8:24 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:

> Right. Or 75 ohms for 75 ohm splitters and systems.  I always specified
> low loss CATV RG6 for wireless mic systems, and most ham RX systems are
> designed around 75 ohms. The reason is simple -- we can buy much better 75
> ohm cables at much lower prices than what we would have to pay for 50 ohm
> cable.  Phat Satellite, for example, sells 1,000 ft spools of flooded
> Commscope RG6 for less than $100, including shipping.
>
> 73, Jim K9YC
>
> On 11/6/2017 4:41 PM, Alan Bloom wrote:
>
>>
>> And don't forget that the isolation spec assumes a perfectd 50-ohm
>> termination on all ports.  For example if one of the ports is seeing a load
>> with a 10 dB return loss, then the isolation will be no better than 10 dB.
>>
>> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net
>