[Elecraft] Minicircuits splitter for diversity?

[Alan Bloom]

And don't forget that the isolation spec assumes a perfectd 50-ohm
termination on all ports.  For example if one of the ports is seeing a
load with a 10 dB return loss, then the isolation will be no better than
10 dB. 

Alan N1AL 

On 2017-11-06 13:06, Jim Brown wrote:

> No -- the Mini-Circuits splitters provide significant isolation between the ports so that, for example, a local oscillator on one port isn't fed to the other port(s). The degree of this is the dB spec for isolation.
> 
> 73, Jim K9YC
> 
> On 11/6/2017 12:21 PM, Michael Walker wrote: 
> 
>> Is that any different than your basic cable splitter other than it has BNC
>> and not F connectors?
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1al at sonic.net