[Elecraft] Minicircuits splitter for diversity?

[Yngvi (TF3Y)]

Hi Jim.

I have the PSC-4-6+ which I put in my own enclosure. I use that together
with the DX-Engineering preamp.
Before that I was using the DX-Engineering 2-port splitter but I needed
more ports, i.e. this one https://www.dxengineering.com/parts/dxe-rsc-2 .

The MiniCircuits one works fine.They also have units going much higher in
frequency.

73, Yngvi TF3Y

On Mon, Nov 6, 2017 at 1:13 PM, Jim Miller <jim at jtmiller.com> wrote:

> I'm looking at this splitter to set up diversity for my K3s. It will only
> be connected to RX paths.
>
> https://www.minicircuits.com/WebStore/dashboard.html?model=ZSC-2-1BR%2B
>
> It goes down to 100Khz and up to 400Mhz.
>
> BNC connections and a rear bracket make it fit well with my setup.
>
> Anyone see a problem with it?
>
> Price seems reasonable for something built with a nice metal case, BNCs and
> quality.
>
> Suggestions?
>
> 73
>
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tf3y at tf3y.net
>



-- 
http://www.tf3y.net