[Elecraft] KPA100 100% Duty Cycle - Operating Temperature

[aj4tf]

Bruce, 
I had the same problem a while ago,  but instead of just replacing the
diodes, I installed some machined IC socket pins in the PWB (i.e.  pins from
a Mill-Max IC socket), then put the diodes in those.   That way, if they
have to be replaced again, it's a "no-solder" job that can be performed in
the field with some needle-nose pliers.

David AJ4TF 
K2, K3S



--
Sent from: http://elecraft.365791.n2.nabble.com/