[Elecraft] KPA1500 with P3 Transmit Monitor

[Jim Rhodes]

On the back of the amp there is a "TX SAMPLE" port to connect your P3.

Jim Rhodes
K0XU

On Nov 2, 2017 6:00 PM, "James Wilson" <w4rks73 at gmail.com> wrote:

> I realize that, Bill but, Elecraft also makes a monitor accessory
> for the P3. It should be useable with the KPA1500 but
> appears not to be the case.
>
> Jim - W4RKS
>
> --------------------------------------------------------
>
> On Thu, Nov 2, 2017 at 5:54 PM, Nr4c <nr4c at widomaker.com> wrote:
>
> > The ATU is built-in.
> >
> > Sent from my iPhone
> > ...nr4c. bill
> >
> >
> > > On Nov 2, 2017, at 2:14 PM, RIchard Williams via Elecraft <
> > elecraft at mailman.qth.net> wrote:
> > >
> > > James,
> > > Am not sure why you need a tuner between the radio and the amp in the
> > first place??  As of now, I have my K3S or K3 driving a Alpha 9500.  I
> > never have used the tuner in either when driving the amp?  I assume the
> > KPA9500 will have a 52 ohm input, and you would not need a tuner.
> > > Dick, K8ZTT
> > >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>