[Elecraft] Have AF control both the Main & SUB volume

[Victor Rosenthal 4X6GP]

Gary,

What you want is CONFIG:SUB AF = BALANCE

73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/
On 1 Nov 2017 04:17, Gary Smith wrote:
> I'm trying to set up the K3s to have both
> the sub and main controlled by the AF knob
> and not finding what I had done before.
> 
> Looking at the manual under CONFIG:SQ MAIN
> it says:
> 
> SUB RF gain normally sets the sub
> receiver´s RF GAIN level. If this knob is
> assigned to main/sub squelch (CONFIG:SQ
> MAIN), then RF gain for main/sub is
> controlled by the main RF gain control.
> 
> When I go to CONFIG:SQ MAIN and select via
> VFO A it offers numbers ranging from 1-29
> and then it says =Sub Pot With two options
> of SQ MAIN and SQL N/A which defaults back
> to SQ MAIN.
> 
> None of the above locks the volume of the
> Sub to the Main like I had it set on the
> K3, AF still controls the main and SUB
> controls the SUB volume.
> 
> I am missing the obvious.
> 
> Suggestions?
> 
> Thanks & 73,
> 
> Gary
> KA1J
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2vco.vic at gmail.com
>