[Elecraft] P3 question

[Fred Jensen]

To expand just a bit, when commanding a QSY from the N1MM+ entry window, 
the P3 seems to put that frequency in the center of the screen in 
fixed-tune mode placing the edges +/- 10 KHz from it. If I QSY to 
14050or 14070, which are the center of a 20 KHz boundary, the right and 
left edges of the screen remain on 20 KHz boundaries which is what I 
wanted.  I believe this is what Alan said.  You'd think I could have 
figured this out on my own. [:-)

73,

Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn

On 5/28/2017 11:19 AM, Fred Jensen wrote:
> Thanks Alan. I just verified that this happens only when I QSY by 
> typing a frequency into the N1MM+ entry window.  Problem resolved.
>
> 73,
>
> Fred ("Skip") K6DGW
> Sparks NV USA
> Washoe County DM09dn
>
> On 5/27/2017 8:41 PM, Alan wrote:
>> If N1MM changes the K3 VFO frequency, even temporarily, it could 
>> cause the P3 to reset its center frequency.  To prevent that, you can 
>> set the P3's FixMode to "Static".
>>
>> Alan N1AL
>>
>