[Elecraft] P3 question

[Alan]

If N1MM changes the K3 VFO frequency, even temporarily, it could cause 
the P3 to reset its center frequency.  To prevent that, you can set the 
P3's FixMode to "Static".

Alan N1AL


On 05/27/2017 04:01 PM, Fred Jensen wrote:
> I normally run a 20 KHz span, fixed-tune [I'm pretty much CW only] on 
> all bands.  When operating manually, I almost never have to reset the 
> centering to put the edges on 20 KHz boundaries. Playing around in 
> WPXwith N1MM+, when I shut down and then turn the rig back on, it 
> comes up on sort of random boundaries. Anybody know:
>
> 1.  is this normal?
>
> 2.  should I be sending this on the N1MM+ list instead of here?
>
> 73,
>
> Fred ("Skip") K6DGW
> Sparks NV USA
> Washoe County DM09dn
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1al at sonic.net