[Elecraft] [K3S] JT65-HF Beginner

[Don Wilhelm]

Bret,

Look at and follow the setup instructions at:
https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLPqw2LDG8kM/pub

Be certain to use DATA A and adjust the audio level to produce 4 bars on 
the ALC meter with the 5th bar flickering.  Set the desired power with 
the POWER knob.  This is important for proper power control. The 
Elecraft transceivers control power differently than other transceivers, 
so ignore the common internet advice to control power with the audio level.

73,
Don W3FPR

On 5/27/2017 10:17 AM, MaverickNH wrote:
> I'm coming to JT65-HF as a beginner, looking to setup and use it with my K3S,
> and have a few questions. Note I have HRD installed as well.
> 
> 1. Should I start with the original V1.0.93 or the HB9HQX V4.9.4?
> 2. PTT via CAT command or PTT Port to use K3S sound card?
> 
> Just to start...
> 
> Bret/N4SRN
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3S-JT65-HF-Beginner-tp7631145.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>