[Elecraft] [KX3] New behavior using JT65

[David F. Reed]

Don, thanks for the suggestion; it seems somehow I got VOX turned on 
when it was off before...
Mystery solved.

Thanks & 73 de Dave, W5SV

On 5/25/17 17:27, Don Wilhelm donwilh at embarqmail.com [KX3] wrote:
> Dave,
>
> Are you using VOX?  If so, try replacing the cable between the soundcard
> and the KX3 mic jack, I am thinking it may have a broken shield and is
> picking up noise.
>
> Try switching to PTT instead of VOX.  I don't know your software
> application nor its capabilities, but you likely need a "one transistor
> keying interface" to drive the KX3 PTT input.
>
> 73,
> Don W3FPR
>
> On 5/25/2017 5:42 PM, 'David F. Reed' w5sv.dave at gmail.com [KX3] wrote:
>> I have been using my KX3 for JT65 successfully for about a year, but now
>> get this new behavior...
>>
>> When I go to transmit, all is well; when the transmission should end,
>> the tones stop as expected, but the KX3 stays in transmit (until I hit
>> the XMIT button).  Clearly something is amiss.
>>