[Elecraft] Elecraft T1 doesn't tune nor read power levels

[Nr4c]

Motors?

Sent from my iPhone
...nr4c. bill


> On May 21, 2017, at 1:29 PM, IU6ASS <5battaglione.servizi at gmail.com> wrote:
> 
> Couple of weeks ago i got my hands on a used rig, an FT817D plus an Elecraft
> T1 tuner. The tuner worked fine until yesterday, doing the autotuning at
> band change and tuning when pressing the "tune" button.
> 
> But now when i press the tune button or switch between bands and transmit
> within the flashing green LED, the tuner stands still, not cycling thru the
> relays to find the best match, as like it's not connected to an RF source at
> all.
> 
> Thanks to the CAT cable, when i switch bands on the radio, the T1 it still
> does the same, and still retains the last stored SWR match saved on the
> various bands, but if i switch to another antenna and try to tune, as
> mentioned, it does not tune.
> 
> I tried tuning in CW, AM, FM, talking over SSB, but to no avail, the tuning
> does not starts.
> 
> I tried switching to a new battery, same effects.
> 
> I tried to listen to the slow CW Info, but not much information.
> 
> I decided to open the T1 and eventually check for cracked solder joints and
> aside from fatigue ones on the BNCs that i could solder easily, nothing out
> of the ordinary came out to my eyes.
> 
> Any idea from more expert minds?
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-T1-doesn-t-tune-nor-read-power-levels-tp7630887.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com