[Elecraft] REMOTE STATIONS - was Re: iphone remote control for the KPA500

Josh josh at voodoolab.com
Wed May 17 10:52:49 EDT 2017


Oh my. I'm doing finger calisthenics & warming up the delete key. This OT storm is gonna be huge!!

73,
Josh W6XU

Sent from my mobile device

> On May 17, 2017, at 5:32 AM, Gian Luca Cazzola <glcazzola at alice.it> wrote:
> 
> Are we sure that this, remote radio,  is really again ham radio and a radio shack?
> 
> I don’t want be offensive to anybody, but I think that our community, including our associations and the contest committees, should ask ourself this question and take decisions consequently.
> 
> This kind of operating, as using 5 -10 - 20kw amplifier or ultra automated stations in contests, for contests or dx-ing is like drugs doping … I think.
> 
> It’s only my opinion or other think the same?
> 
> Ian IK4EWX
> 
> 
> 
>> Il giorno 17 mag 2017, alle ore 14:12, Jeff <kb2m at comcast.net> ha scritto:
>> 
>> I’m not awake yet. After a cup of coffee I read through the Remote Rig RC-1216H  doc’s and now see that you DO get  some KPA500 monitoring information with this setup. Can the KPA500 and my SteppIR be monitored with one 1216H ? If so for $300 it’s starting to look like a good way to go, as I can’t do any control functions on my BigIR remotely, just control it’s frequency. I would also like to have a way to retract the antenna fully....
>> 
>> 73 Jeff kb2m
>> 
>> From: Barry Baines 
>> Sent: Tuesday, May 16, 2017 11:43 PM
>> To: Jeff 
>> Cc: elecraft at mailman.qth.net 
>> Subject: Re: [Elecraft] iphone remote control for the KPA500
>> 
>> Jeff: 
>> 
>> On May 16, 2017, at 8:03 PM, Jeff <kb2m at comcast.net> wrote:
>> 
>> 
>> Is anyone working on an iPhone remote control APP for the KPA500? 
>> 
>> Not a problem today if you use the Remote Rig RC-1216H to control the KPA500 (available through HRO).  It uses a web interface which looks just like the KPA500 front panel; the amplifier interface utilizes the RS232 serial connection, so I control my KPA500 with my iPad or MacBook running Safari or Chrome.  Likewise, I use a second Remote Rig 1216H to control my Green Heron Rotor Controller (RT-21), so I can manage my antenna pointing with the iPAD/iPhone/MacBook with ease.
>> 
>> See:  http://www.remoterig.com/wp/?page_id=1010#tabs-3
>> 
>> Note that the RC-1216H can manage various amplifiers and antenna rotators.  Unfortunately, the firmware does not support the KAT500 or the Alpha 9500.
>> 
>> The RC-1216H is an excellent device for managing compatible devices when operating remotely;  e.g. my shack is in SE Georgia and I’m in New England, Texas, etc.  
>> 
>> 
>> At this point the only devices that I must use a Windows OS is with the KAT500 and the Antenna Genius 8x2 antenna switch.  The antenna switch allows me to select which transceiver (K3 or Flex) is  active on a given port.  The Antenna Genius has a LAN connection, so I can access it relatively easily remotely and run the windows software from wherever I am.  
>> 
>> I use a serial-to-ethernet converter to interface with the KAT500 so that the computer at my location can control the KAT500 at the shack without a PC in the shack.
>> 
>> Lastly, I use the West Mountain Radio 5-port R4005i to turn on/off devices using a web interface that it has.  The allows me to remotely activate the Flex6700, control preamps and other accessories, etc.    So again, it can all be done with an iPhone/iPad/MacBook or any web-capable device.
>> 
>> To the extent that I can run a shack without running Windows and a PC, the happier I am.  
>> 
>> FWIW,
>> 
>> Barry Baines, WD4ASW
>> (Currently in Mercer, PA enroute to Hamvention…)
>> 
>> 
>> 
>> I move my KPA-500 with me when I travel from my winter home to my summer home. When down south for the winter I use the KPA500 with my FLEX 6500 that has a wonderful iPhone remote control APP.  It would be nice to be able to control the KPA500 via iPhone also...
>> 
>> 73 Jeff kb2m 
>> 
>> ---
>> This email has been checked for viruses by AVG.
>> http://www.avg.com
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to bbaines at mac.com
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to glcazzola at alice.it
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to josh at voodoolab.com



More information about the Elecraft mailing list