[Elecraft] K3S CW Delay on KEY OUT ?

[Svend Spanget]

Thanks, Don.

I already did both without any luck...

----- Original meddelelse -----

> Fra: Don Wilhelm [via Elecraft] <ml+s365791n7630718h41 at n2.nabble.com>
> Til: Svend Spanget <spanget at privat.dk>
> Dato: Tir, 16. maj 2017 13:48
> Emne: Re: K3S CW Delay on KEY OUT ?
> 
> Svend, For the "1." problem, re-do the Transmit Gain Calibration, and
> be certain to include the mW calibration. As for the PTT not coming
> active when in transverter state, I have no immediate answer, but
> suggest you contact K3support. 73, Don W3FPR On 5/16/2017 4:19 AM,
> Svend Spanget wrote: > I recently connected a Kuhne TR 144 H +40 to
> my K3 in order to be QRV on 2 m > for the upcoming Sporadic E season
> and weak signal dx. > I use the KXV3 with output power set to 1.5 mW
> (XV1 PWR = L 1.50). > > It works fine but I have a few issues: > > 1.
> When switching on or after bandswitch the transverter is not driven
> to > full output. A short XMIT in FM mode somehow restores the output
> and going > back to SSB the output from the transverter is now as
> expected. > > 2. When using VOX with SSB the transverter is not
> keyed. Using PTT either > with a footswitch or the pushbutton on my
> MH2 keys the transverter just > fine. I have a cable connected to KEY
> OUT and the transverter. > Using VOX and SSB with my Henry 2KD-5
> works perfect. >
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft [http://mailman.qth.net/mailman/listinfo/elecraft]Help:
> http://mailman.qth.net/mmfaq.htm [http://mailman.qth.net/mmfaq.htm]Post:
> mailto:[hidden email] [http://mailman.qth.net/mmfaq.htm] This list
> hosted by: http://www.qsl.net [http://www.qsl.net]Please help support
> this email list: http://www.qsl.net/donate.html [http://www.qsl.net/donate.html]Message
> delivered to [hidden email] [http://www.qsl.net/donate.html]
> 
> --------------------------------------------------------------------
> 
> If you reply to this email, your message will be added to the
> discussion below:
> http://elecraft.365791.n2.nabble.com/K3S-CW-Delay-on-KEY-OUT-tp7630637p7630718.html [http://elecraft.365791.n2.nabble.com/K3S-CW-Delay-on-KEY-OUT-tp7630637p7630718.html]To
> unsubscribe from K3S CW Delay on KEY OUT ?, click here [http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=7630637&code=c3BhbmdldEBwcml2YXQuZGt8NzYzMDYzN3wxMjgzNTg4NjY5].
> NAML [http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml]





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3S-CW-Delay-on-KEY-OUT-tp7630637p7630719.html
Sent from the Elecraft mailing list archive at Nabble.com.