[Elecraft] kxusb question

[Nr4c]

I believe you are close. The plug is not the issue. The RX and TX RS232 signals are separated on the KXUSB plug. One on tip, other on ring. 

The ICOM has both signals on the tip. So a short jumper combining the tip and ring signals on the tip of a mono plug should get you going. 

Sent from my iPhone
...nr4c. bill


> On May 7, 2017, at 8:00 AM, barry whittemore <wb1edi at hotmail.com> wrote:
> 
> I have a KXUSB and was wondering if i can use it with an ICOM 706. I am going to do a trip with the 706 for the June VHF contest and think it is basically the same except that it has a stereo plug and the 706 is mono. is the ring in the KXUSB used? I do not wish to damage either thing.
> 
> Thanks
> 
> Barry
> 
> NF1O
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com