[Elecraft] VHF+UHF Radio Wish List

[Ron D'Eau Claire]

I suspect he meant Power Amplifier (PA) not PS. Such is the danger of acronyms. They can start wars! 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Nr4c
Sent: Saturday, May 6, 2017 6:53 PM
To: Clay Autery
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] VHF+UHF Radio Wish List

What PS?

Sent from my iPhone
...nr4c. bill


> On May 6, 2017, at 8:27 PM, Clay Autery <cautery at montac.com> wrote:
> 
> Nice idea....  Once the 15dB limit is removed, you can use the 10 watt 
> to drive the KPA1500 or (gain limit modded) any amp you choose...
> 
> If you found a dead 100W K3 PS, you could use the bracketing, back 
> panel, et al as needed...  Lot of room if you dump the PS...
> 
> ______________________
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
> 
>> On 5/5/2017 7:23 PM, Harry Yingst via Elecraft wrote:
>> At one point I considered taking a K3/10 and installing Transverters where the PA deck would go.
>> 
>> 
>> 
>>      From: Bill Johnson <k9yeq at live.com>
>> To: Phil Hystad <phystad at mac.com>; Elecraft 
>> <elecraft at mailman.qth.net>
>> Sent: Friday, May 5, 2017 7:17 PM
>> Subject: Re: [Elecraft] VHF+UHF Radio Wish List
>> 
>> Phil,
>> 
>> Wayne and Eric are smart dudes, for sure.  I don't know that they are into VHF, UHF to the degree needed to do what you ask.  They do have a team of engineers, also very bright and HAM interested, so the request may eventually take hold.  I would love a K2 or K3 style platform for VHF, UHF based on the Elecraft design features to include features such as full duplex, etc.  I don't know what the market for such equipment might be, but they might wish to respond to our interest?!  I would enjoy such equipment and they could allow space for modules to be added which would include even higher freq stuff for those who wanted it. 
>> 
>> 72 & 73,
>> Bill
>> K9YEQ, FT’er for K2, KX1, KX3, KXPA100,  KAT500, W2, etc. 
>> 
>> -----Original Message-----
>> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
>> Phil Hystad
>> Sent: Friday, May 5, 2017 12:36 PM
>> To: Elecraft <elecraft at mailman.qth.net>
>> Subject: [Elecraft] VHF+UHF Radio Wish List
>> 
>> I was planning to ask a question about the 2-meter option board for K3/K3S but thought to ask this question instead.
>> 
>> Has there ever been interest (by others of this forum) or discussion from Wayne & Eric about a new radio, one specifically dedicated to VHF and UHF with satellite comms (Doppler) and other features.  I am thinking of possibly a three band radio but at least two (2 meter, 70 cm) and optionally 1240-1300 MHz.  All mode of course!  10 to 15 watts output would be all that is necessary (IMO).
>> 
>> There are other radios on the market but they all have one thing in 
>> common as

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to ron at elecraft.com