[Elecraft] KPOD toggle macros?

[Jim Miller]

No PFx left. I'll stick with separate buttons or tap/hold for now. 

Thanks all for saving me a bunch of dead end time. 

Jim ab3cv


On May 2, 2017, at 7:57 PM, Cady, Fred <fcady at montana.edu> wrote:

A work around is to make the two macros as you do now (chaining one to the other), assign them to two macro positions in the K3 and then assign them to one of the programmable function keys (like you do now).  Then, assign another of the K3 macros to tap or hold the function key (I know, there goes another macro position) and then use the KPOD associated with that macro to activate it.  So you have to use 3 K3 macros instead of 2.

Again, the term KPOD macro is a misnomer.  There aren't any macros in the KPOD, just the ability to use the KPOD switches to execute the K3 macros associated with that switch.


 
Cheers,

Fred KE7X


For all KE7X elecraft books, see www.ke7x.com



From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Harry Yingst via Elecraft <elecraft at mailman.qth.net>
Sent: Tuesday, May 2, 2017 4:04 PM
To: Jim Miller; Elecraft at mailman.qth.net
Subject: Re: [Elecraft] KPOD toggle macros?
 
I'm still waiting for the same thing, I think a part of it is that the k3 does not haveenough macros as each one of the 16 are already assigned to the KPOD buttons.




      From: Jim Miller <jtmiller47 at gmail.com>
 To: "Elecraft at mailman.qth.net" <Elecraft at mailman.qth.net> 
 Sent: Tuesday, May 2, 2017 5:34 PM
 Subject: [Elecraft] KPOD toggle macros?
   
I'm finally back to working with my KPOD and some macros. 

Has anyone figured out how to do a toggle similar to what can be done on the K3 front panel?

I have a toggle on the K3 for doing my split up1 sequence and a second activation turns it all off. 

I'm looking to toggle DIGOUT1 which will switch between my vertical and an inverted V. 

A second one will be used to drive an aux out on the KPOD which will toggle my RX array direction. 

73

Jim ab3cv
______________________________________________________________

   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu