[Elecraft] Antenna Problems with K3 firmware 5.57

[Don Wilhelm]

Bill,

I would try an L/C series trap at the frequency of your offending BC 
band station across your antenna feedline.  That should not be dependent 
on the IN/OUT impedance requirement of the DX Engineering BC band filter.

73,
Don W3FPR

On 3/31/2017 5:36 PM, Bill Frantz wrote:

>
> The voltage is most likely from AM broadcast stations. The strongest
> station, measured with the P3, is KLIV (5000W) about 8 miles from my QTH.
>
>