[Elecraft] Amplifier

[Michael Walker]

I would like


   - Attractive Price Point
   - 220VAC (given)
   - 1 antenna port
   - full RS232 or TPC/IP remote control
   - Good self protection due to antenna issues.
   - No tuner
   - No multiple antenna ports
   - Good metering for power, current, temp, etc...

In other words, make a great amp, by simple and bullet proof.  Leave the
antenna switching, tuners, etc to other devices.

Keep the price down.  By doing this, it makes it simple to support as a
company and easy to build.

You'll sell more by doing this.

73, Mike va3mw


On Thu, Mar 30, 2017 at 2:42 PM, ab4iqkf4cxo <ab4iq at comcast.net> wrote:

> I personally would like to have a solid state amp capable of 1500 watts.  I
> have an Alpha 9500 and Palstar HF-Auto that works just fine but I enjoy the
> way my KPA500/KAT500 along with the K3S works seamlessly with one another.
> Surely a solid state amp and tuner could replace my present setup with less
> real estate.   I took the time to train my KAT500 with my antennas and
> really works nice.  With my other setup the Palstar has to do its thing
> with
> RF applied and the alpha has to do its thing.  The Alpha takes three
> minutes
> to warm up and the KPA500 instantaneous and has 6 meters as well where the
> Alpha does not.  I'm not degrading the Alpha and Palstar at all because
> they
> do work and quite well.
>
>
>
> Ed.. AB4IQ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net
>