[Elecraft] question about the KX3

[tomb18]

HiYes it can. You need to use the KY command. See the K3 programmers reference.73 Tom va2fsq.com


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: "M. George" <m.matthew.george at gmail.com> Date: 2017-03-28  7:25 PM  (GMT-05:00) To: kzeroxb at gmail.com Cc: Elecraft Mailer <elecraft at mailman.qth.net> Subject: Re: [Elecraft] question about the KX3 
You should be able to send CAT commands to key FSK on your KX3.  K8ZT has a
good write up on doing this in N1MM+:

http://k8zt.blogspot.com/2016/07/using-elecraft-kx3kx3-ky-codes-to-allow.html

mg

On Tue, Mar 28, 2017 at 5:06 PM, Rick <kzeroxb at gmail.com> wrote:

> Can anyone tell me whether the KX3 can operate FSK (not AFSK) using an
> input from a computer, not the CW key?
>
> Thanks es 73, Rick K0XB
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.matthew.george at gmail.com
>



-- 
M. George
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca