[Elecraft] K2 main encoder wanted

[Harry Yingst]

I would suggest Break-Free CLP, It works great and has a lot of uses.

It works quite well and last a long time.




      From: David Woolley <forums at david-woolley.me.uk>
 To: elecraft at mailman.qth.net 
 Sent: Sunday, March 26, 2017 5:37 AM
 Subject: Re: [Elecraft] K2 main encoder wanted
   
WD40 is a preservative, not a lubricant.  It will act as a penetrating 
oil, to free seized parts, but for a longer term solution you want to 
look at sewing machine or hair clipper oil.

On 25/03/17 20:57, Bob G3PJT wrote:
>
> I have managed to get the encoder turning reasonable freely. I put a
> very small amout of WD40 on the shaft where it enters the housing bush.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com