[Elecraft] kat500 can't be seen by kat500 utility

[k7sss at aol.com]

Hi Buddyl,
Just a wild possibility, did you select the port in the KAT500 utility?  
When I update a Elecraft product several ports are listed within the 
appropriate  utility, so I try each listed port, one usually works.
GL 73
 K7SSS Jim H 
 
 
In a message dated 3/19/2017 9:54:29 A.M. Pacific Daylight Time,  
buddys70 at gmail.com writes:

when i  plug in the serial/usb cable, a new com port, com4 appears in the
list of  com ports.  however, the kat500 utility cannot complete the
handshake  when trying to connect to the new com4.  i checked the plug in
the  back, and it appears to be all the way in.

advice and suggestions  appreciated.


73 de
W3BS, Buddy  Spiegel
______________________________________________________________
Elecraft  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/elecraft
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Elecraft at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
Message delivered to  k7sss at aol.com