[Elecraft] bricked my K3
Jamie WW3S
ww3s at zoominternet.net
Sat Mar 18 15:53:53 EDT 2017
thank you, I think I have it now.....at least the radio is talking to the
pc, so that’s good thing.....
-----Original Message-----
From: Dick Dievendorff
Sent: Saturday, March 18, 2017 2:54 PM
To: 'Jamie WW3S' ; elecraft at mailman.qth.net
Subject: RE: [Elecraft] bricked my K3
Jamie: I've been asked to explain a "why": Install the lastest K3 Utility
because I updated the Help Text that describes the recovery procedure. In
an earlier e-mail you mentioned a checkbox for copy new files from Elecraft,
and that's been removed in recent K3 Utility versions (there's a button
instead). That made me think you're using an older K3 Utility version, and
the help text I'm describing may not be in that earlier K3 Utility version.
73 de Dick, K6KR
-----Original Message-----
From: Dick Dievendorff [mailto:dick at elecraft.com]
Sent: Saturday, March 18, 2017 11:08
To: 'Jamie WW3S' <ww3s at zoominternet.net>; 'elecraft at mailman.qth.net'
<elecraft at mailman.qth.net>
Subject: RE: [Elecraft] bricked my K3
Jamie:
First install the most recent version of the K3 Utility from our web page at
http://www.elecraft.com/K3/k3_software.htm. It's verison 1.16.7.25.
There are step-by-step instructions in K3 Utility Help, troubleshooting, MCU
load failure, that will walk you through the recovery steps.
73 de Dick, K6KR
-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jamie
WW3S
Sent: Saturday, March 18, 2017 08:29
To: elecraft at mailman.qth.net
Subject: [Elecraft] bricked my K3
trying to load new firmware......if I read Fred manual correctly, power on
while holding “SHIFT/LO/0” should reset it but its not working......the
SHIFT/LO/0 is that the knob for the width? I’m assuming it is, but mine
doesn’t say the zero.....
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.8007 / Virus Database: 4756/14135 - Release Date: 03/18/17
More information about the Elecraft
mailing list