[Elecraft] Traveling Power Supply for KX2?

[Irma & Linas(LY2H)]

Thanks everybody for a usefull info!
The US powerr plug seems working no problems with a normal travel adaptor
on my KX2 battery charger.
Shouldn't be a problem on this PS too.

73 de Linas ( LY2H)

On 2017 kov. 16, kt at 02:32 Bill Frantz <frantz at pwpconsult.com> wrote:

> My Pro Audio Engineering power supply has a C8 connector. C8 is
> part of a standard for connectors designed specifically to allow
> different cords for different country's electrical plug
> requirements.  (See: <https://en.wikipedia.org/wiki/IEC_60320>
> for details.)
>
> 73 Bill AE6JV
>
> On 3/15/17 at 4:18 PM, elecraft at mailman.qth.net (Dave B via
> Elecraft) wrote:
>
> >But it looks like it has a non EU compliant AC power lead, (looks like a
> >standard two blade ungrounded US lead.)  But supplied with an
> >adapter. Not sure about the full legality of that practice
> >these days.
> >
> >I suspect at the PSU end of the AC lead, it uses a standard two pole
> >"C8" connector, so you should be able to source, or already have a
> >suitable lead for your own country.
>
> ---------------------------------------------------------------------------
> Bill Frantz        |"After all, if the conventional wisdom was
> working, the
> 408-356-8506       | rate of systems being compromised would be
> going down,
> www.pwpconsult.com | wouldn't it?" -- Marcus Ranum
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to irmalinas73 at gmail.com
>