[Elecraft] [dxlab] WW and K3S FSK RTTY

[Chuck Chandler]

I just worked 5U5R on 17M RTTY and paid attention to what was happening...

I did set the QSO selector to X, and it transmits now when I send.

At first, if I double-clicked in the S pane to capture the callsign, it
would clear the callsign when I then clicked in the X pane.  I *THINK*
setting QSO selector to X allowed me to capture the call in S and still
transmit via X.

However, after unkeying I observed the following:

I could hear what sounded like band noise, and saw some background noise in
WinWarbler, but looking at the P3 panadapter I could see the big signal I
should have been hearing.  Tapping XFIL brought the signal back into my
headphones and onto WinWarblers display.

Also, before doing this I had gone through the K3S config menu to confirm
the right filters were set for DATA receive.  I also made sure that in DATA
the filters were centered at 2.21 kHz.  My offsets are set to 2210 as well
in WW.

Also, tapping the XFIL button, while it should pick the other (of two)
installed filters instead just brings back the audio... it doesn't swap to
the other filter, just to the one I had already selected.

I'm cross-posting to the Elecraft group to see if anyone can tell me what I
might be doing wrong...

On Mon, Mar 13, 2017 at 4:29 PM, ' Dave AA6YQ' aa6yq at ambersoft.com [dxlab] <
dxlab at yahoogroups.com> wrote:

>
>
> >>>AA6YQ comments below
>
> -----Original Message-----
> From: dxlab at yahoogroups.com [mailto:dxlab at yahoogroups.com]
> Sent: Monday, March 13, 2017 3:15 PM
> To: dxlab at yahoogroups.com
> Subject: [dxlab] WW and K3S FSK RTTY
>
> Two issues I'm not sure are WW or K3S issues.
>
> First, after sending a macro from WW, sometimes the K3S acts deaf until I
> tap the XFIL key to pick another filter width. Not every time, I haven't
> figured out how to make it happen or not happen reliably yet.
>
> >>>I don't see anything in
>
> <http://www.dxlabsuite.com/dxlabwiki/K3PSKRTTY>
>
> >>>regarding that. Until someone more K3-knowledgeable responds, you might
> work around it by augmenting your "RTTY startup" macro to send a CAT
> command that selects an appropriate filter.
>
> Second, the RTTY Receive panel shows (soundcard) and the RTTY receive &
> transmit panel shows (Xcvr Ctl App) and I have both S and X receive panes.
> But, if I happen to click in other than the X panel, then the rig won't
> transmit and the RTTY receive & transmit panel shows (soundcard fsk) which
> then turns red if I try to transmit.
>
> >>>In the Main window's "RTTY Transmit" panel, set the QSO selector to
> 'X'. that will ensure that your K3 is always used for RTTY transmission.
> This is the newly-added step 5b in
>
> <http://www.dxlabsuite.com/dxlabwiki/K3CWRTTYXcv>
>
> 73,
>
> Dave, AA6YQ
>
> __._,_.___
> ------------------------------
> Posted by: " Dave AA6YQ" <aa6yq at ambersoft.com>
> ------------------------------
> Reply via web post
> <https://groups.yahoo.com/neo/groups/dxlab/conversations/messages/167122;_ylc=X3oDMTJyMHNsbmM2BF9TAzk3MzU5NzE0BGdycElkAzMwMDc4MzcEZ3Jwc3BJZAMxNzA1MDYzMTA4BG1zZ0lkAzE2NzEyMgRzZWMDZnRyBHNsawNycGx5BHN0aW1lAzE0ODk0NDA1Nzk-?act=reply&messageNum=167122>
> • Reply to sender
> <aa6yq at ambersoft.com?subject=RE%3A%20%5Bdxlab%5D%20WW%20and%20K3S%20FSK%20RTTY>
> • Reply to group
> <dxlab at yahoogroups.com?subject=RE%3A%20%5Bdxlab%5D%20WW%20and%20K3S%20FSK%20RTTY>
> • Start a New Topic
> <https://groups.yahoo.com/neo/groups/dxlab/conversations/newtopic;_ylc=X3oDMTJlN2l1bjVtBF9TAzk3MzU5NzE0BGdycElkAzMwMDc4MzcEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwNmdHIEc2xrA250cGMEc3RpbWUDMTQ4OTQ0MDU3OQ-->
> • Messages in this topic
> <https://groups.yahoo.com/neo/groups/dxlab/conversations/topics/167118;_ylc=X3oDMTM4bnI0NTA0BF9TAzk3MzU5NzE0BGdycElkAzMwMDc4MzcEZ3Jwc3BJZAMxNzA1MDYzMTA4BG1zZ0lkAzE2NzEyMgRzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzE0ODk0NDA1NzkEdHBjSWQDMTY3MTE4>
> (4)
> ------------------------------
> Have you tried the highest rated email app? <https://yho.com/1wwmgg>
> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email
> app on the market. What are you waiting for? Now you can access all your
> inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email
> again with 1000GB of free cloud storage.
> ------------------------------
> Visit Your Group
> <https://groups.yahoo.com/neo/groups/dxlab/info;_ylc=X3oDMTJlZGV2Zm4yBF9TAzk3MzU5NzE0BGdycElkAzMwMDc4MzcEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTQ4OTQ0MDU3OQ-->
>
>    - New Members
>    <https://groups.yahoo.com/neo/groups/dxlab/members/all;_ylc=X3oDMTJmYW5jdnVvBF9TAzk3MzU5NzE0BGdycElkAzMwMDc4MzcEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzE0ODk0NDA1Nzk->
>    10
>
> [image: Yahoo! Groups]
> <https://groups.yahoo.com/neo;_ylc=X3oDMTJkaTM0MmViBF9TAzk3MzU5NzE0BGdycElkAzMwMDc4MzcEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxNDg5NDQwNTc5>
> • Privacy <https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
> Unsubscribe <dxlab-unsubscribe at yahoogroups.com?subject=Unsubscribe> • Terms
> of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
>
> .
>
> __,_._,___
>



-- 


===================
Chuck Chandler
chandlerusm at gmail.com
===================